GENERAL PURPOSE RUBBER STRIPS
Rubber strips a medium duty rubber. Commercial grade rubber stripping.
Buy flexible, durable, rubber strip gasket used in applications where a good performing strip of rubber is needed.
Other Options:
Neoprene Rubber Strips: Oil resistant, better for most industrial applications
Silicone Rubber Strips: High Temp, 450º F, maintains excellent durability at high temperatures
Neoprene Rubber Strips 60A Medium Hardness WITH ADHESIVE BACKING
it has only moderate resistance to petroleum-based oils and fuels. It can be considered as a good general purpose rubber with an excellent balance of physical and chemical properties. It has better chemical, oil, ozone and heat resistance than natural rubber but a rather lower level of physical properties. It's gas permeability is fairly low and flame resistance is excellent, chloroprene being one of the few rubbers that are self-extinguishing. Neoprene gives excellent rubber-metal bonds and good resilience. Certain grades of Neoprene may crystallize and harden during storage although they will thaw on heating. Chloroprene is widely used because of its wide range of useful properties and reasonable price. Typical applications include belting, coated fabrics, cable jackets, seals and gaiters. Neoprene® is a registered trademark of DuPont Performance Elastomers.
Typical Physical Properties:
Solid Rubber - This product is NOT sponge or foam
Durometer / Hardness Shore A 60+/-5
Tensile Strength 525 PSI
Elongation 200%
Operating Temperature -40 Deg. F. to +200 Deg. F.
Finish Smooth Both Sides
Color Black
Powder / Talc Free
PSA Peel and Stick Adhesive has good general purpose adhesion to most materials.
Typical Physical Properties are provided for your evaluation. These typical properties are not designed to set specification requirements. Rubber Sheet Warehouse believes that it's up to the end user to determine if a specific material is suitable for an application.
Material: sponge&foam EPDM rubber,neoprene,nirtrile rubber
Color: Black, any other colour is available
Hardness (Shore A)：25 ±5 as standard or per request
Specific gravity:0.5 to 0.7 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance:RMA Standard Cross-sectional Tolerance E2,or per request
Application:Door Bottom
This Glass shower door PVC strip is popular.
Material: PVC
Color: Translucent
MAC Hard+soft PVC(the best quality)
Application: glass shower door
Material: EPDM
Color: Black, any other colour is available
Hardness (Shore A)： 70 ±5 as standard or per request
Specific gravity: 1.2 to 1.35 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2,or per request
Application: Garage Door
Material: solid EPDM rubber ,foam EPDM rubber, Metal
Color: Black, any other colour is available
Hardness (Shore A)： 70 ±5 as standard or per request, 25 ±5 as standard or per request
Specific gravity: 1.2 to 1.35 g/cm³,0.5 to 0.7 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2,or per request
Material: sponge&foam EPDM rubber,neoprene,nirtrile rubber
Color: Black, any other colour is available
Hardness (Shore A)： 25 ±5 as standard or per request
Specific gravity: 0.5 to 0.7 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2, or per request
Application:
Door & window sealing
Material: sponge&foam EPDM rubber,neoprene,nirtrile rubber
Color: Black, any other colour is available
Hardness (Shore A)： 25 ±5 as standard or per request
Specific gravity: 0.5 to 0.7 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2,or per request
Application:
Automobile, Industrial electrical equipment, door and window
Material: sponge&foam EPDM rubber,neoprene,nirtrile rubber
Color: Black, any other colour is available
Hardness (Shore A)： 25 ±5 as standard or per request
Specific gravity: 0.5 to 0.7 g/cm³
Tensile strength: 10MPA
Temperature Range: -40 °F - 248 °F (-40°C - 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2,or per request
Application: window and door
EPDM rubber extrusion exhibits anti-fire property, but it is not better than CR rubber extrusion, this seal strip is used to common door and window, as a versitle rubber profile that has competitive price and cover a wide rubber market.
Foam rubber seal, During the manufacturing process, can be manipulated to exhibit certain unique traits, as well as color can change to meet clients' requirement, density can be raised or lowered, hardness is at range of 25-30A.
